How to Use the eitech Seat Element Red in Your Builds
By eitech Metallbaukasten | Published: 2026-10-24
Category: How-to Guides
Learn how to attach and position the eitech Seat Element red (01570 ROT) in your metal construction projects. Step-by-step instructions with common mistakes to avoid.
Quick Answer
Use the eitech Seat Element red (01570 ROT) as a decorative or functional seat in vehicles, chairs, or cockpits. Attach it with M4 screws through its mounting holes, aligning the part so the red finish faces outward.
Why the Seat Element Red Stands Out
The eitech Seat Element red is a Manufaktur-tagged component, meaning it's produced in smaller batches with attention to detail. Its red finish makes it easy to spot in complex builds, adding a splash of color to predominantly metallic constructions.
Because this part is sold individually (not in a bag set), you can order exactly the number you need for a specific model. This is useful when you're replicating a multi-seat vehicle or a control station with multiple chairs.
Common Build Scenarios
The seat element works well in construction vehicles, trains, aircraft cockpits, and even amusement park rides. It can be mounted on flat beams, angled brackets, or directly onto a base plate.
Its compact size (roughly 2-hole spacing) means it fits into tight spaces without requiring extra support beams. However, if you're building a load-bearing seat for a heavy model, consider reinforcing the mounting point with an additional bracket underneath.
How to Attach the Seat Element Red
- Identify the mounting holes: The seat element has two or more small holes (typically 4 mm diameter) on its underside or sides. Hold the part against your build to see which holes align with your beam or bracket holes. Common mistake: trying to force the part onto a beam with misaligned holes. Always check alignment before inserting screws.
- Select the right screws: Use M4x8 or M4x10 screws (depending on the thickness of the beam you're attaching to). The screw should pass through the seat element's hole, through the beam hole, and then be secured with a nut on the other side. Checkpoint: if the screw is too long, it may protrude and interfere with other parts. If too short, the nut won't grip properly.
- Position the seat element: Place the seat element so the red surface faces outward or upward, depending on your design. For a driver's seat, the curved back should face the rear of the vehicle. Common mistake: mounting the seat backward, which can make the model look odd. Test the orientation by placing a small figure or minifig in the seat before tightening.
- Tighten the screws evenly: Insert the screws through the seat element and beam, then add a washer and nut on the opposite side. Tighten each screw a little at a time to avoid warping the plastic or bending the metal beam. Checkpoint: overtightening can crack the seat element's plastic or strip the threads. Stop when the nut is snug and the seat doesn't wobble.
- Test the fit and adjust: Gently press the seat to see if it moves. If it wobbles, add a second screw or a small bracket to stabilize it. For a multi-seat build, repeat the process for each seat, keeping consistent spacing. Common mistake: skipping the test step and discovering a loose seat after the build is complete. Always test before adding surrounding parts.
Product Fact
- Seat element, red: The eitech Seat Element red is a Manufaktur-tagged component with SKU code 01570 ROT. Manufaktur parts are produced in limited runs, so if you need multiple matching seats for a project, it's wise to order all at once to ensure color consistency.
Seat element, red
