How to Build a Wheel Loader XL from eitech Parts

Quick Answer

Start by sorting your parts, then assemble the chassis, add the movable shovel arm, and finish with the articulated steering. Follow the steps below to build a working eitech Wheel Loader XL model.

Step-by-Step Assembly Guide

1. Sort and Inventory All Parts: Lay out every metal strip, bolt, nut, and wheel from the eitech Wheel Loader XL set. Group similar parts together and check them against the parts list in the manual. Missing or extra parts are easier to spot before you start, so you can contact support early if needed.
2. Build the Chassis Base: Assemble the main frame that forms the lower body of the loader. Use the longest strips for the side rails and secure them with bolts, but leave the fasteners slightly loose so you can adjust alignment later. A square chassis prevents wobbly wheels and misaligned body panels later.
3. Attach the Wheel Assemblies: Mount the wheels onto the axles and fix them to the chassis. Ensure each wheel spins freely by checking that the axle is not bent and the nuts are not overtightened. Spin each wheel after tightening; if it drags, loosen the nut a quarter turn.
4. Install the Articulated Steering Joint: Connect the front and rear chassis sections with the steering pivot. Follow the manual's hole alignment and use the supplied pins or bolts. Do not over-tighten, as the joint must pivot smoothly. Test the steering range of motion now—if it binds, adjust the bolt tension before moving on.
5. Assemble the Shovel Arm Linkage: Build the arm that lifts the shovel, attaching the lower arm to the chassis and the upper arm to the tilt mechanism. Use the diagrams to match the correct hole positions for the lift and tilt functions. Misaligned holes here will cause the shovel to tilt unevenly, so double-check each connection.
6. Mount the Shovel and Test Movement: Attach the shovel to the end of the arm using the pivot points. Then test the lift and tilt actions by moving the control levers or manual mechanisms. Adjust any tight spots by loosening and realigning bolts. The shovel should raise and tilt in one smooth motion; if it sticks, check for crossed links or over-tightened pivots.
7. Final Tightening and Inspection: Once everything moves correctly, go back and tighten all bolts to a firm, even tension. Inspect the model for any loose parts or sharp edges, and make sure the steering still works after final tightening. A final check now prevents parts from coming loose during play or display.

Product Facts

• Wheel loader XL: The eitech Wheel Loader XL is a true giant with enormous performance and huge dimensions, perfect for quarries or large construction sites. This means the model is larger than typical construction sets, so you need a spacious work area and a bit more time to complete the build.

  

• Wheel loader XL: Its movable shovel arm and separately tilting arm and shovel make moving large masses of earth or stone child's play. When assembling, pay extra attention to the linkage for the shovel arm so that the tilt function works smoothly after the build.