How to Use the Cord Wheel 60 mm in eitech Construction

By eitech Metallbaukasten | Published: 2026-10-18

Category: How-to Guides

Learn to install and use the eitech Cord Wheel 60 mm in your model builds. This guide covers assembly, common mistakes, and practical tips.

Quick Answer

The eitech Cord Wheel 60 mm is a replacement component for model builds that require a 60 mm diameter wheel. Use it with compatible axles and brackets for smooth rotation.

Why Choose the 60 mm Cord Wheel

The 60 mm diameter offers a good balance between stability and compactness for medium-sized eitech models. It is supplied complete, meaning it includes the hub and any necessary fittings, so you can install it without sourcing extra parts.

Because it is a replacement part, it is designed to match existing eitech components. If your build originally used a different wheel size, you may need to adjust the axle length or bracket spacing.

Step-by-Step Installation

Prepare the Axle and Brackets: Select a galvanized axle that fits the wheel's hub bore (typically 4 mm). Insert the axle through the wheel hub and secure it with a retaining clip or set screw if provided. Common mistake: using an axle that is too short, which prevents the wheel from spinning freely. Check axle length against the wheel's hub width plus frame clearance.
Mount the Wheel on the Model Frame: Position the wheel between two bracket arms or frame rails. Slide the axle through the pre-drilled holes in the frame, then add spacers or washers on each side to center the wheel. Common mistake: over-tightening the brackets, which binds the axle and stops rotation. Leave a small gap (about 0.5 mm) between bracket and wheel hub.
Test Rotation and Adjust: Spin the wheel by hand to confirm it rotates smoothly without wobble. If it drags, loosen the brackets slightly or check for debris in the hub. Common mistake: ignoring a slight wobble, which can worsen under load and damage the axle. If wobble persists, check that the axle is straight and the hub bore is clean.

Product Details

Cord wheel Ø 60 mm, complete.: The eitech Cord wheel Ø 60 mm, complete, is a replacement cord wheel component with a 60 mm diameter, supplied as a complete unit. This means you get everything needed for installation in one package, reducing the chance of missing parts.
Cord wheel Ø 60 mm, complete.