How to Install the eitech Additional Bag Bracket Angle

Quick answer

To install the eitech additional bag bracket angle, first identify the bracket holes that align with your model's connection points, then secure them with the included screws and nuts using a mini screwdriver. Ensure all brackets are oriented correctly to support your structure.

Step-by-step installation guide

1. 1. Prepare your workspace and tools: Lay out the eitech additional bag bracket angle set on a flat, well-lit surface. You will need a mini screwdriver (typically a Phillips head) and the small screws and nuts that come with the set. Have your model ready and identify where you want to add the bracket. Common mistake: using a screwdriver that is too large can strip the small screws. Stick to a mini screwdriver.
2. 2. Select the correct bracket size: Choose a bracket from the set that matches the distance between the two connection points on your model. The brackets range from 1x1 to 5x1 holes. Hold the bracket against the model to confirm alignment before inserting any screws. Checkpoint: if the bracket holes do not line up with the model's holes, try a different bracket size or angle bracket.
3. 3. Attach the bracket to the model: Insert a screw through the bracket hole and into the model's hole. Place a nut on the opposite side and tighten it with the screwdriver. Repeat for all bracket holes. Do not fully tighten one screw before inserting the others; this allows slight adjustments for alignment. Common mistake: overtightening a single screw first can cause the bracket to sit crooked. Finger-tighten all screws first, then go back to tighten fully.
4. 4. Verify stability and orientation: After all screws are tightened, gently wiggle the bracket to check for movement. If it shifts, one of the screws may be loose or the bracket may be the wrong size. Also confirm that the bracket angle is correct for your model's design (e.g., 90 degrees for a corner support). Checkpoint: a properly installed bracket should not rotate or slide. If it does, re-check the screw tightness and bracket selection.

Product facts

• Additional bag bracket, angle: This add-on set includes 10 brackets 1x1 to 5x1 hole and 31 angle brackets in various designs. The variety of bracket sizes lets you choose the right length for your specific model joint, ensuring a snug fit without excess overhang.