How to Connect a Socket Red to an eitech Build

Quick answer

Slide the eitech Socket, red (miniature coupling) onto the exposed metal stud or axle until it clicks into place. Ensure the red collar is fully seated to create a secure electrical or mechanical connection.

Step-by-step connection guide

1. Step 1: Identify the insertion point: Locate the metal stud, axle, or terminal where the socket attaches. The socket fits over a round cross‑section, typically 3–4 mm in diameter. Check that the stud is free of burrs or paint that could block the socket.
2. Step 2: Align the socket: Hold the Socket, red (miniature coupling) so its inner hole faces the stud. Push it straight on—do not twist or force it at an angle. If the socket resists, remove it and inspect the stud for debris; never hammer it on.
3. Step 3: Press until seated: Apply even pressure until you feel the socket click or slide fully home. The red collar should be flush against the surrounding part. A loose socket may disconnect during movement—double‑check the collar sits completely over the stud.
4. Step 4: Test the connection: Gently tug the socket to confirm it holds. For electrical circuits, verify continuity by touching the socket to a battery terminal; for mechanical builds, rotate the joint to ensure free movement. If the connection feels wobbly, the socket may be the wrong size or the stud may be damaged.

Product facts

• Socket, red (miniature coupling): This red socket component is listed under SKU 01722 in the Standard variant and tagged Manufaktur. Knowing the exact SKU helps you order the correct replacement or additional sockets for multi‑connection builds.