Elastic Adjusting Ring Ø 10 mm: Where It Fits

Quick answer

The eitech Elastic Adjusting Ring Ø 10 mm is a black, 10 mm ring used to secure or adjust parts on eitech models. It fits shafts or pins that accept a 10 mm ring and is handy for tensioning or locking components in place. Keep spares on hand because these rings are easy to lose during assembly or disassembly. For exact compatibility with your model, check your instruction manual or measure the shaft diameter.

What the eitech Elastic Adjusting Ring Ø 10 mm does

This small black ring is a hardware component intended for adjusting or securing parts in place. Unlike a fixed collar, its elasticity lets it grip a shaft or pin while allowing some movement or tension. It is listed under the Manufaktur tag and carries the eitech brand name, so it matches other eitech components in fit and finish.

Where it fits on eitech models

The ring fits any eitech assembly point designed for a 10 mm ring. Common spots include axles, pivot pins, and linkage joints where you need to hold a part without fully locking it. Because the catalog does not list specific model compatibility, use your build instructions or measure the shaft diameter to confirm a 10 mm fit. If the shaft is larger or smaller, this ring is not the right size.

How to replace a lost eitech ring

If you lose a ring during a build, check the floor and your work surface first—these rings can roll. If it is gone, order a replacement eitech Elastic Adjusting Ring Ø 10 mm. Before installing, clean the shaft of any debris. Slide the ring into position and test the fit by gently moving the part; it should hold without excessive play. If the ring feels loose, verify the shaft diameter or consider a different size.

Care tips for eitech small parts

Keep small parts like this ring dry and free of dust. Store them in a compartmented box so they do not scratch or deform. Avoid overstretching the ring during installation, as that can reduce its grip over time. When cleaning, use a dry cloth; solvents may damage the material. Regularly check rings on active models for wear and replace them if they lose elasticity.

eitech Elastic Adjusting Ring FAQ

What size is the eitech Elastic Adjusting Ring?

It has a diameter of Ø 10 mm and comes in black. It is designed for shafts or pins that accept a 10 mm ring. Measure your shaft to confirm a 10 mm fit.

Where can I use this ring on my model?

Use it wherever your eitech instructions call for a 10 mm adjusting ring, such as on axles, pivots, or linkages to secure or tension parts. Check your build manual for exact locations.

What if I lose an eitech ring?

Order a replacement eitech Elastic Adjusting Ring Ø 10 mm. Keep a few spares to avoid interruptions during assembly. Spares save time and frustration.

How do I care for eitech small parts?

Store them dry and dust-free, avoid overstretching, and clean with a dry cloth. Inspect regularly for wear. Proper care extends part life.

Product facts

• Elastic adjusting ring Ø 10 mm, black: eitech Elastic Adjusting Ring Ø 10 mm, black, SKU 01402 SCHWARZ, Manufaktur tag. This is the exact replacement for a lost or worn 10 mm ring in your eitech model.